1.當丁基膠涂布機處于其他位置搬運時，表面需要用柔軟的保護墊保護，然后用軟繩綁緊，用鉤子提起，平穩地移動到其他位置。在運動過程中，請注意周?chē)と说陌踩苊馀鲎病Ｍ瑫r(shí)保護設備不與其他物品碰撞
1. When the butyl rubber coater is transported in other positions, the surface needs to be protected with soft protective pads, then tied with soft ropes, lifted with hooks, and moved steadily to other positions. During the movement, please pay attention to the safety of surrounding workers and avoid collisions. At the same time, protect the equipment from collision with other objects
2.使用包裝箱時，使用叉車裝載。包裝箱應防雨防曬，儲存和運輸溫度應在-10℃至40℃之間。
2. When using the packing box, use the forklift to load. The packing box shall be rain proof and sun proof, and the storage and transportation temperature shall be between - 10 ℃ and 40 ℃.

3.在運輸過程中，包裝箱允許在容器中堆疊2層。包裝箱到達后，檢查機器在運輸過程中是否損壞，所有零件是否丟失。開箱時應采取所有保護措施防止損壞。機器及其附件。并且確保開箱時零件不會掉落。
3. During transportation, the packing box is allowed to be stacked in two layers in the container. After the packaging box arrives, check whether the machine is damaged during transportation and whether all parts are lost. All protective measures shall be taken to prevent damage when unpacking. Machine and its accessories. And ensure that the parts will not fall when unpacking.
4.丁基膠粘劑涂布機概述我公司生產的丁基橡膠涂膠機采用技術，設計時更大限度地考慮了用戶的方便，從而大大提高了生產率和工作效率。丁基橡膠涂層是中空玻璃加工中的一個關鍵環節。只有當丁基橡膠涂層完好時，才能生產出好的中空玻璃。為了確保間隔框架和玻璃在更好的狀態下緊密密封，應保持準確的工作溫度。
4. Overview of butyl adhesive coater The butyl rubber coater produced by our company adopts advanced technology, and the user's convenience is taken into consideration in design, thus greatly improving productivity and working efficiency. Butyl rubber coating is a key link in the processing of insulating glass. Only when the butyl rubber coating is intact can a good insulating glass be produced. In order to ensure that the spacer frame and glass are tightly sealed in a better state, accurate operating temperatures should be maintained.
這需要的技術，可以控制行駛速度和涂層一定的厚度。為了滿足各種形狀中空玻璃的生產要求，有必要生產能夠在彎曲的間隔框上涂膠的丁基膠涂布機。
This requires advanced technology to control the driving speed and a certain thickness of the coating. In order to meet the production requirements of various shapes of insulating glass, it is necessary to produce butyl rubber coating machines that can apply glue on curved spacer frames.
以上就是為大家介紹的有關立式丁基膠涂布機詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://m.hebeiruizhi.com
The above is a detailed introduction of the vertical butyl rubber coater for you, and we hope it will be helpful to you. If you have any questions, please contact us. We will provide you with our attitude http://m.hebeiruizhi.com