回吸式點膠機在太陽能邊框點膠會使用到以下的配件：高壓點膠閥、點膠控制器、氣壓控制裝置和針頭，這些都是能直接影響到膠量調節的因素，可根據需要調節膠量大小而控制每個配件，例如：點膠針頭規格是有非常多種，如果第一次使用的針頭規格過大，可針對太陽能邊框點膠寬度選擇規格，直接把膠量調節到相差不多的寬度，然后利用點膠控制器再做精密調節，這就是桌面式自動點膠機膠量調節的方法。
The following accessories will be used in the solar frame dispensing of the return suction dispenser: high pressure dispensing valve, dispensing controller, air pressure control device and needle, which are all factors that can directly affect the adjustment of glue amount. Each accessory can be controlled by adjusting the glue amount according to the needs. For example, there are many specifications of dispensing needle. If the specification of needle used for the first time is too large, The specification can be selected according to the dispensing width of the solar frame, the glue amount can be directly adjusted to the same width, and then the precise adjustment can be made by using the dispensing controller. This is the method of adjusting the glue amount of the desktop automatic dispensing machine.
還有針對自動點膠機類型的特點，會有一些其它的膠量調節方式，比如回吸式點膠機，如果采用回吸式點膠閥，在停止點膠之后，會有一個回吸膠水動作，這也是膠量調節方式，能保持膠水不會出現漏滴，針對粘度低的膠水，會有比較好的涂膠效果喔！
In addition, according to the characteristics of the type of automatic dispensing machine, there will be some other glue quantity adjustment methods, such as the back suction dispensing machine. If the back suction dispensing valve is adopted, there will be a back suction glue action after stopping dispensing. This is also the glue quantity adjustment method, which can keep the glue from leaking. For the glue with low viscosity, it will have a better gluing effect!

其次，膠水是通過機器來實現自動混合，用于生產量比較大的產品點膠，由于AB料桶是分開的，是通過泵將膠水抽到混合管中，所以有助于避免膠水在桶中發生固化。雙液點膠機液體流量的控制：通過齒輪泵，主要適用于不含有填料的膠水（填料，即為了增強膠水的導熱性，將膠水里面填加如氧化鋁，石英砂，陶瓷等具有良好硬度的顆料狀物質）。在出膠控制方面采用了更加復雜的工藝形式，自動化智能化的操作模式，為點膠提供了很大的方便。
Secondly, glue is automatically mixed by machine and used for dispensing products with large production. Since AB material barrels are separated and glue is pumped into the mixing pipe by pump, there is no need to worry about the solidification of glue in the barrel. Control of liquid flow of double liquid dispensing machine: through gear pump, it is mainly applicable to glue without filler (filler, that is, in order to enhance the thermal conductivity of glue, fill the glue with granular materials with strong hardness such as alumina, quartz sand and ceramics). In terms of dispensing control, more complex process forms and automatic and intelligent operation mode are adopted, which provides great convenience for dispensing.
膠量調節需要針對自動點膠機類型，再采用相應的方式，跟回吸式點膠機是一樣的道理，根據實際機器例子，做膠量的調節，而不是盲目性的，如果您有什么不懂，可以咨詢我們中制制作的點膠機廠家，能給您一個準確的回復喔！
The glue quantity adjustment needs to be based on the type of automatic dispensing machine, and then adopt the corresponding method. It is the same as the suction dispensing machine. According to the actual machine example, adjust the glue quantity, not blindly. If you don't understand anything, you can consult our Chinese made dispensing machine manufacturer, and can give you an accurate reply!
以上的精彩內容來自：雙組份打膠機更多的精彩內容來自：http://m.hebeiruizhi.com歡迎大家與我們進行交流。
The above highlights come from: two-component glue applicator, and more highlights come from: http://m.hebeiruizhi.com Welcome to communicate with us.