全自動打膠機和丁基膠涂布機是具有一定的保質期的，一般來講其保質期有10年的時間。雖然說其保質期只有僅僅的10年時間，但是由于其使用的環境的不同，在使用的過程當中也是會有可能出現一些問題，下面就來看看在使用全自動打膠機和丁基膠涂布機的時候都會出現哪些問題吧。
Automatic rubber machine and butyl coating machine has a certain shelf life, generally speaking, its shelf life is 10 years. Although its shelf life is only 10 years, but due to the different environment of its use, there may be some problems in the process of use. Let's take a look at the problems that will appear in the use of automatic rubber beater and butyl rubber coater.
一、隨著全自動打膠機和丁基膠涂布機所使用的時間在不斷的增加，這一個設備所具有密封性能是不斷的降低的，這樣會導致這一個設備的內部氣體與外界大氣相通，從而會使得其所具有的保溫性能出彩大的下降。這是一個出現頻率非常高的問題所在。
1、 With the continuous increase of the time used by the automatic rubber beater and butyl rubber coater, the sealing performance of this equipment is constantly reduced, which will lead to the internal gas of this equipment communicating with the external atmosphere, thus greatly reducing its thermal insulation performance. This is a very high frequency problem.

二、隨著設備自身所具有的密封性能的下降，其所具有的抗壓能力也是會呈現出一個下降的趨勢的。在這樣的一個情況之下，一旦外界給予其的壓力過大的話，那么是會很容易造成其表面的涂層脫落的，甚至有時候還會出現爆炸的現象，造成嚴重的人員傷亡產生。因此在對其進行安裝之前一定要對所具有的抗壓性能以及抗壓強度有一個充分了解。并在使用的時候采取一些適當的防護措施，這對于延長使用壽命來講具有出彩大的好處。
2、 With the decline of the sealing performance of the equipment itself, its compressive capacity will also show a downward trend. In such a case, once the external pressure is too large, it is easy to cause the coating on the surface to fall off, and even sometimes there will be explosion, causing serious casualties. Therefore, before the installation, we must have a full understanding of the compressive performance and compressive strength. And take some appropriate protective measures when using, which has great benefits for extending the service life.
三、隔熱層所具有的隔熱性能也將會出現降低的現象，這也是所具有的一個常見的問題所在。
3、 The thermal insulation performance of the insulation layer will also be reduced, which is a common problem.
在使用全自動打膠機和丁基膠涂布機的時候可能會出現的問題就包括上面的這些方面了，可以說這也是這一個行業目前亟待解決的問題所在，只有這樣才能更好的進行生產。
In the use of automatic rubber machine and butyl rubber coater, the problems may include the above aspects, it can be said that this is the industry's current problems to be solved, the only way to better production.