一、上膠速度太快
　　1、 Glue application speed is too fast
　　一些客戶為了加快自己的生產節奏生產計劃后,調整密封劑認為速度太快,導致膠體仍沒有完全達到合格標準的頭已經到下一個位置膠操作,如果我們需要加速調整膠膠機運動參數,所以我們也要有相應的相應設置膠供應系統,如這一次我們需要增加供應壓力,增加上膠速度，使上膠機隨物體移動速度增加。如果只增加上膠機的移動速度而不調整壓力，很可能會導致上膠不充分。
　　In order to speed up the production schedule, some customers adjust the sealant to think that the speed is too fast, so that the head of the sealant which still does not meet the qualified standard has reached the next position. If we need to speed up the adjustment of the movement parameters of the glue machine, we also need to set the corresponding glue supply system, such as this time we need to increase the supply pressure, Increase the speed of gluing, so that the speed of gluing machine increases with the movement of objects. If only increase the moving speed of the gluer without adjusting the pressure, it is likely to lead to insufficient gluing.

　　2. 供膠壓力不足
　　2. Insufficient glue supply pressure
　　這種情況其實小編在案例中已經描述過了，即使不調整膠水機的運行速度也會出現不全是膠水的情況，那么有可能是膠水壓力太小了。此時我們只需要調整供給壓力就可以很好的解決這個問題。
　　This situation has been described in the case. Even if the running speed of the glue machine is not adjusted, it may not be all glue. Then the glue pressure may be too small. At this time, we just need to adjust the supply pressure to solve this problem.
　　3.鼻子傳感器損壞
　　3. Nose sensor damaged
　　這種情況很少見，但也有可能發生。在我們的上膠機的頭部有一個傳感器來檢測鋁棒的深度。如果發現鋁棒過深或過淺，它會自動調整移動速度和供應壓力(自動調節范圍在小范圍內)。如果我們的鋁桿本身在深度上不同，除了我們的心情會發生壞斷外!
　　This is rare, but it can happen. At the head of our dispenser there is a sensor to detect the depth of the aluminum bar. If it is found that the aluminum bar is too deep or too shallow, it will automatically adjust the moving speed and supply pressure (the automatic adjustment range is in a small range). If our aluminum rods are different in depth, except our mood will break!
　　以上就是對雙組份打膠機打膠不飽滿的原因的詳細介紹，想要了解更多請點擊官網http://m.hebeiruizhi.com
　　The above is a detailed introduction to the reason why the two-component dispenser is not full. For more information, please click http://m.hebeiruizhi.com